Free radiator fix to keep every room warm this winter
Free radiator fix to keep every room warm this winter

Bleeding your radiators can improve their efficiency by up to 6%, helping every room stay warm while cutting energy use this winter, according to experts at EDF Energy. The simple, cost-free fix also helps radiators heat up faster and maintain maximum warmth for longer.

Why bleeding radiators matters

Air trapped inside a radiator can reduce its effectiveness by 6%, preventing a home from staying adequately warm during the colder months. EDF Energy describes bleeding as a straightforward yet powerful method to enhance efficiency, reduce energy consumption, and "ensure every room stays comfortably warm all winter long".

Signs that a radiator needs bleeding include sluggish heating, gurgling sounds when the heating switches on, and cold patches, particularly towards the top.

How to bleed your radiators

Specialists at First Choice Housing Association (FCHA) have shared step-by-step guidance for bleeding radiators. The process requires a radiator bleed key or a flathead screwdriver, depending on the radiator type, plus an old towel, a cloth, and a container to catch water.

The recommended steps are: switch the heating on and inspect each radiator for cold spots; if none are present, bleeding is not necessary. Then switch the heating off and allow radiators to cool completely. Lay an old towel on the floor and position a container beneath the radiator valve. Using the key or screwdriver, open the valve anti-clockwise, stopping at the first hiss of escaping air. When the hissing stops and water trickles out, close the valve clockwise and wipe it with the cloth to check for leaks.

EDF Energy guidance notes that if a hissing sound is heard, that is trapped air escaping, and once it stops, the air is gone and the radiator is set. FCHA advises repeating the process for all radiators identified in the first step, adding that once done, radiators will "heat up a lot quicker".